The bronchial orientation had influence on VB. The luminal diameter of S1/ S10 ( these bronchi were vertical to axial section) under VB was the smallest.

INQUIRY INTO DEFORMATION OF THE AXIAL SECTION IN CROSS ROLLING WITH HELICAL GROOVES AND INVESTIGATION OF ITS EXPERIMENT IN MOIRE METHOD Research on NC Grinding of Rotary Surface Parts with Arc Axial Section and Precision Controlling

螺旋孔型斜轧轴向断面变形的探讨及云纹实验研究圆弧轴截形回转面的磨削及精度控制方法的研究

互联网摘选

The complicated radial-axial ring rolling technology is used mainly to manufacture large rings, in which the radial and axial section of rings are rolled at the same time.

环件径轴向轧制是对环件径向和轴向同时进行轧制的复杂工艺，主要用于轧制大型环件。

互联网摘选

In this paper, a new type tooth profile of sprocket has been given from the study of designing the bobber's axial section.

本文首先从设计滚刀的轴向截形入手，提出了链轮的新齿形；

互联网摘选

It is distinct from profile of every axial section of tooth back of relief grinded hob.

铲磨滚刀齿背的各轴截面截形都不一样。

互联网摘选

Grinding of Rotary Surface Composed of Discrete Points in Its Axial Section and Calculation and Analysis of Theoretical Roughness

列表轴截形回转面的磨削及理论粗糙度的计算与分析

互联网摘选

Research on Electrochemical Grinding of Rotary Surface Composed of Discreate Points in Its Axial Section

列表轴截形回转面电解磨削研究

互联网摘选

General Expression of Cutter's Axial Section for Machining Helicoids and Its Numerical Solution

计算螺旋面刀具轴截形的通用公式和计算机数值解法

互联网摘选

Analyzing and Calculating Axial Section Profiles of Worm with Straight Generatrix

直纹蜗杆轴向齿形的分析与计算

互联网摘选

Research on NC Grinding of Rotary Surface Parts with Arc Axial Section and Precision Controlling

圆弧轴截形回转面的磨削及精度控制方法的研究

互联网摘选

Research of mathematics model of the general center line of axial section flow channel of centrifugal pump

离心泵通用轴面流道中线的数学模型研究

互联网摘选

A new method of calculating the axial section flow channel of centrifugal pump

离心泵叶轮轴面流道计算新方法

互联网摘选

Its pistil consists of three carpels, the inferior ovary has three locules and each locule has two ovules which are anatropous on axile placenta. The ovule is bitegminous and crassinucellate.

雌蕊3心皮3室，子房下位，中轴胎座，每室2倒生胚珠，厚珠心，双珠被，内珠被独自形成珠孔。

互联网摘选

By using the non-instantaneous section envelope machining principle, a mathematical model of mold grinding helical-spur cylinder gear is established, which is a calculating method to shape axile sectional of grinding wheel for numerical control mold grinding helical-spur cylinder gear.

利用无瞬心包络法成形加工的原理，建立了成形磨削斜齿圆柱齿轮的一种数学模型，为斜齿圆柱齿轮数控成形磨削的砂轮轴向修形提供了一种计算方法。

互联网摘选

It is shown in this paper that due to the neglecting of curvature effect in the calculation of deformation of slope, the ordinary straight line finite elements are not suitable for the calculation of axile symmetrical shells with abrupt change of curvature.

本文指出了在一般用直线单元的轴对称壳的有限元法中，由于忽视了曲率对斜度变形的影响，并不能用以处理曲率突变的轴对称壳问题。

互联网摘选

The precision machining principles and characteristics of CNC form grinding for gear dies are introduced. A analysis method of profile-calculating is put forward, which is available to shape axile sectional of grinding wheel by numerical control.

介绍CNC成形磨齿方法精密加工齿轮模具的原理和特点，应用解析法建立成形磨削渐开线圆柱斜齿轮模具的数学模型，推导成形砂轮廓形计算公式。

互联网摘选

The bundles from the outer region enter the ovary wall, while those from the central region extend into the axile and become placental bundles which fade away gradually in prolongation.

前者的维管束进入子房壁，后者的维管束进入子房的中轴，形成胎座维管束。至延长部后，胎座维管束逐渐消失。

互联网摘选

When the radius of the nanofiber after tapered region changes from large value to small value, the axile intensity of optical field transmitting in nanofiber increased firstly and then decreased gradually.

当拉锥后纳米光纤半径逐渐变小时，纳米光纤的光传输模场中心光强先逐渐增强然后又逐渐减小。

互联网摘选

In order to improve the coding speed for angle encoder, using hardware describing language based Complex Programmable Logic Device ( CPLD), a new coding method was designed for matrix axile angle encoder.

为提高矩阵式编码器的译码速度，提高可靠性，设计一种新型译码方法。程序软、硬件结构。

互联网摘选

Energy Saving with Hydro-coupling Technology on Flow Control in Pump and Induced Fan The effect of two leaves and leaf angle to axile flow pump and blower fan working capability

泵和风机应用液力偶合器调速的节电技术二叶及叶片角度对轴流泵和风机性能的影响

互联网摘选

At P deficiency, the ratio of lateral roots to axile roots, root length to root weight of the primary roots of 181 increased significantly.

而且，低磷使181初生根的侧根/轴根比值、根长度/根重比值较高。

互联网摘选